The world's fastest mini-split installation! The world's best guarantee! MS12 (12,000 BTU) Airspool Quick 'n' Easy solar air conditioner/heater. 5 minutes (literally) to connect everything. No HVAC tech needed. 5-year happiness guarantee!

Just spoke with Dave, a very nice man.

First, Dave, the owner of the company, is awesome. It is very nice to find someone who is hands on with their company. He will respond to any questions in a very timely manner.
Second, this 12000 btu quick n easy model is exactly as stated. Super easy installation. Very nice unit, just beware, if you turn the temperature down too low, it will freeze you out. Very hot in Fl. already and this unit runs with free solar energy all day long. I have my wife putting her jacket on when I crank it low. Very pleased with my purchase, will be purchasing another soon.

I've been waiting for what seems like 15 years for this tech to mature and come to market in a feasible and legitate product.

If you can drill a hole in your wall, you can install this. I have the tools to do the HVAC tech "required" install, but for the price, this is a no brainer. I had a block wall, old slump block, which required a $45 diamond bit drill, but unless you have this type of block, EVERYTHING is included. Even the whole saw included would probably cut through concrete, just not through my block - it had literal granite in it.

There are competitors on the market. I won't mention them, but you likely are very familiar with them. After reading just a handful of reviews from the other guys, it was an easy call.

In fact, the owner of Airspool, replied to my email, on a weekend, within an hour. I did not expect that, and I even told him to wait until Monday to reply (been a small business owner, so I know what it's like) but he responded to my emails within hours (probably minutes actually.)

I'm only a week or so it, and living in Phoenix, i've got it turned all the way down, but it got too cold (only May.) I'm realistic about my expectations for cooling, so with that in mind, assuming this lasts as long as the warranty would suggest, I expect to be very happy.

Don't hesitate, do it, pull the (metaphorical) trigger!

We bought one. It was so easy to install. We have a large AC on the roof and window units. This product works so much better. We bought 2 more units. We are using solar, but can use PG&E. Our electric bill has really gone down.

TLDR
Dave is awesome and truly cares about his customers. He is professional and stays in communication with you even after you purchase. I highly recommend buying from him and the unit is great. I had to replace the original one I ordered after kinking the copper lineset. Dave reassured me and made it right by swapping it out for a brand new unit. Thanks Airspool.

I bought the 12k Hybrid Quick N Easy Mini split and had quite the journey of hooking it up. Put the unit in my garage near the ceiling and it was hard to lift and put all the lines through the wall solo at 9 feet high. Eventually I got the indoor unit installed then went outside to connect the lineset to the outdoor unit. Got that hooked up after a little trouble due to the fact that the indoor lineset stub coming through the wall barely protruded out the hole to the exterior brick wall. It was difficult to bend the copper stub lineset down. After connecting these and plugging in the communication cable and power cord I eagerly went inside the garage to test the coolness of the air coming out from the indoor unit. Here is where I made the first mistake of using a a temperature probe. My arm got tired from holding for over a minute and I accidentally pushed the probe too far into the unit. The metal probe hit the fan blower wheel while it was spinning causing a small portion of the wheel’s plastic spokes to break. They fell to the floor but the unit was still working and operating as normal. I blew a sigh of relief and emailed Dave VanZanten, the owner of Airspool. Much to my surprise he responded right away (within 30 minutes). He even sent me a troubleshooting video if I wanted to attempt to fix and a new infrared thermometer free of charge. The indoor unit remained fully operational so I just let it be and counted my blessings.

A few days later I made the decision that I wanted to move the outdoor unit to a new location and mount it to a brick wall that was further away from my home’s central ac unit. After emailing Dave he quickly reassured me that you can indeed move the unit as long as you give it 15-30 minutes of power down time. So I then proceeded to disconnect the lines. Here is when disaster struck. I had to bend the lineset/stubb coming through the wall in a different direction in order to mount the exterior unit in a new location. Trying not to kink this stubb, I still accidentally managed to bend one of the copper lines too far. The result was a leak/kink that let all of the refrigerant out slowly over a few minutes.

I panicked and emailed Dave again late on Easter Sunday. He again responded quickly and professionally. After explaining my mistakes and situation he came up with a plan to send back these units (indoor and outdoor) as long as I could pay for shippping. He even made a new SKU for those like me with thicker interior walls who needed a longer interior lineset stubb. I was able to purchase this new add on and some additional feet of exterior lineset to make the job easier for the new units. Dave sent me a new exterior and interior unit with precharged lineset and prepaid labels to send the old units back. He said he just wanted me to be happy with my purchase even after I totally screwed everything up. I thought I would have to repurchase the entire system at the higher after tariff price but no Dave saved the day. Thank you Dave and Airspool for the quick communication, transparency, and for taking great care of an idiot like me. I definitely recommend getting someone to help you lift and move these units, especially when trying to mount the outdoor unit up in the air on the wall.

Just spoke with Dave, a very nice man.

First, Dave, the owner of the company, is awesome. It is very nice to find someone who is hands on with their company. He will respond to any questions in a very timely manner.
Second, this 12000 btu quick n easy model is exactly as stated. Super easy installation. Very nice unit, just beware, if you turn the temperature down too low, it will freeze you out. Very hot in Fl. already and this unit runs with free solar energy all day long. I have my wife putting her jacket on when I crank it low. Very pleased with my purchase, will be purchasing another soon.

I've been waiting for what seems like 15 years for this tech to mature and come to market in a feasible and legitate product.

If you can drill a hole in your wall, you can install this. I have the tools to do the HVAC tech "required" install, but for the price, this is a no brainer. I had a block wall, old slump block, which required a $45 diamond bit drill, but unless you have this type of block, EVERYTHING is included. Even the whole saw included would probably cut through concrete, just not through my block - it had literal granite in it.

There are competitors on the market. I won't mention them, but you likely are very familiar with them. After reading just a handful of reviews from the other guys, it was an easy call.

In fact, the owner of Airspool, replied to my email, on a weekend, within an hour. I did not expect that, and I even told him to wait until Monday to reply (been a small business owner, so I know what it's like) but he responded to my emails within hours (probably minutes actually.)

I'm only a week or so it, and living in Phoenix, i've got it turned all the way down, but it got too cold (only May.) I'm realistic about my expectations for cooling, so with that in mind, assuming this lasts as long as the warranty would suggest, I expect to be very happy.

Don't hesitate, do it, pull the (metaphorical) trigger!

We bought one. It was so easy to install. We have a large AC on the roof and window units. This product works so much better. We bought 2 more units. We are using solar, but can use PG&E. Our electric bill has really gone down.

TLDR
Dave is awesome and truly cares about his customers. He is professional and stays in communication with you even after you purchase. I highly recommend buying from him and the unit is great. I had to replace the original one I ordered after kinking the copper lineset. Dave reassured me and made it right by swapping it out for a brand new unit. Thanks Airspool.

I bought the 12k Hybrid Quick N Easy Mini split and had quite the journey of hooking it up. Put the unit in my garage near the ceiling and it was hard to lift and put all the lines through the wall solo at 9 feet high. Eventually I got the indoor unit installed then went outside to connect the lineset to the outdoor unit. Got that hooked up after a little trouble due to the fact that the indoor lineset stub coming through the wall barely protruded out the hole to the exterior brick wall. It was difficult to bend the copper stub lineset down. After connecting these and plugging in the communication cable and power cord I eagerly went inside the garage to test the coolness of the air coming out from the indoor unit. Here is where I made the first mistake of using a a temperature probe. My arm got tired from holding for over a minute and I accidentally pushed the probe too far into the unit. The metal probe hit the fan blower wheel while it was spinning causing a small portion of the wheel’s plastic spokes to break. They fell to the floor but the unit was still working and operating as normal. I blew a sigh of relief and emailed Dave VanZanten, the owner of Airspool. Much to my surprise he responded right away (within 30 minutes). He even sent me a troubleshooting video if I wanted to attempt to fix and a new infrared thermometer free of charge. The indoor unit remained fully operational so I just let it be and counted my blessings.

A few days later I made the decision that I wanted to move the outdoor unit to a new location and mount it to a brick wall that was further away from my home’s central ac unit. After emailing Dave he quickly reassured me that you can indeed move the unit as long as you give it 15-30 minutes of power down time. So I then proceeded to disconnect the lines. Here is when disaster struck. I had to bend the lineset/stubb coming through the wall in a different direction in order to mount the exterior unit in a new location. Trying not to kink this stubb, I still accidentally managed to bend one of the copper lines too far. The result was a leak/kink that let all of the refrigerant out slowly over a few minutes.

I panicked and emailed Dave again late on Easter Sunday. He again responded quickly and professionally. After explaining my mistakes and situation he came up with a plan to send back these units (indoor and outdoor) as long as I could pay for shippping. He even made a new SKU for those like me with thicker interior walls who needed a longer interior lineset stubb. I was able to purchase this new add on and some additional feet of exterior lineset to make the job easier for the new units. Dave sent me a new exterior and interior unit with precharged lineset and prepaid labels to send the old units back. He said he just wanted me to be happy with my purchase even after I totally screwed everything up. I thought I would have to repurchase the entire system at the higher after tariff price but no Dave saved the day. Thank you Dave and Airspool for the quick communication, transparency, and for taking great care of an idiot like me. I definitely recommend getting someone to help you lift and move these units, especially when trying to mount the outdoor unit up in the air on the wall.

Just spoke with Dave, a very nice man.

First, Dave, the owner of the company, is awesome. It is very nice to find someone who is hands on with their company. He will respond to any questions in a very timely manner.
Second, this 12000 btu quick n easy model is exactly as stated. Super easy installation. Very nice unit, just beware, if you turn the temperature down too low, it will freeze you out. Very hot in Fl. already and this unit runs with free solar energy all day long. I have my wife putting her jacket on when I crank it low. Very pleased with my purchase, will be purchasing another soon.

I've been waiting for what seems like 15 years for this tech to mature and come to market in a feasible and legitate product.

If you can drill a hole in your wall, you can install this. I have the tools to do the HVAC tech "required" install, but for the price, this is a no brainer. I had a block wall, old slump block, which required a $45 diamond bit drill, but unless you have this type of block, EVERYTHING is included. Even the whole saw included would probably cut through concrete, just not through my block - it had literal granite in it.

There are competitors on the market. I won't mention them, but you likely are very familiar with them. After reading just a handful of reviews from the other guys, it was an easy call.

In fact, the owner of Airspool, replied to my email, on a weekend, within an hour. I did not expect that, and I even told him to wait until Monday to reply (been a small business owner, so I know what it's like) but he responded to my emails within hours (probably minutes actually.)

I'm only a week or so it, and living in Phoenix, i've got it turned all the way down, but it got too cold (only May.) I'm realistic about my expectations for cooling, so with that in mind, assuming this lasts as long as the warranty would suggest, I expect to be very happy.

Don't hesitate, do it, pull the (metaphorical) trigger!

We bought one. It was so easy to install. We have a large AC on the roof and window units. This product works so much better. We bought 2 more units. We are using solar, but can use PG&E. Our electric bill has really gone down.

TLDR
Dave is awesome and truly cares about his customers. He is professional and stays in communication with you even after you purchase. I highly recommend buying from him and the unit is great. I had to replace the original one I ordered after kinking the copper lineset. Dave reassured me and made it right by swapping it out for a brand new unit. Thanks Airspool.

I bought the 12k Hybrid Quick N Easy Mini split and had quite the journey of hooking it up. Put the unit in my garage near the ceiling and it was hard to lift and put all the lines through the wall solo at 9 feet high. Eventually I got the indoor unit installed then went outside to connect the lineset to the outdoor unit. Got that hooked up after a little trouble due to the fact that the indoor lineset stub coming through the wall barely protruded out the hole to the exterior brick wall. It was difficult to bend the copper stub lineset down. After connecting these and plugging in the communication cable and power cord I eagerly went inside the garage to test the coolness of the air coming out from the indoor unit. Here is where I made the first mistake of using a a temperature probe. My arm got tired from holding for over a minute and I accidentally pushed the probe too far into the unit. The metal probe hit the fan blower wheel while it was spinning causing a small portion of the wheel’s plastic spokes to break. They fell to the floor but the unit was still working and operating as normal. I blew a sigh of relief and emailed Dave VanZanten, the owner of Airspool. Much to my surprise he responded right away (within 30 minutes). He even sent me a troubleshooting video if I wanted to attempt to fix and a new infrared thermometer free of charge. The indoor unit remained fully operational so I just let it be and counted my blessings.

A few days later I made the decision that I wanted to move the outdoor unit to a new location and mount it to a brick wall that was further away from my home’s central ac unit. After emailing Dave he quickly reassured me that you can indeed move the unit as long as you give it 15-30 minutes of power down time. So I then proceeded to disconnect the lines. Here is when disaster struck. I had to bend the lineset/stubb coming through the wall in a different direction in order to mount the exterior unit in a new location. Trying not to kink this stubb, I still accidentally managed to bend one of the copper lines too far. The result was a leak/kink that let all of the refrigerant out slowly over a few minutes.

I panicked and emailed Dave again late on Easter Sunday. He again responded quickly and professionally. After explaining my mistakes and situation he came up with a plan to send back these units (indoor and outdoor) as long as I could pay for shippping. He even made a new SKU for those like me with thicker interior walls who needed a longer interior lineset stubb. I was able to purchase this new add on and some additional feet of exterior lineset to make the job easier for the new units. Dave sent me a new exterior and interior unit with precharged lineset and prepaid labels to send the old units back. He said he just wanted me to be happy with my purchase even after I totally screwed everything up. I thought I would have to repurchase the entire system at the higher after tariff price but no Dave saved the day. Thank you Dave and Airspool for the quick communication, transparency, and for taking great care of an idiot like me. I definitely recommend getting someone to help you lift and move these units, especially when trying to mount the outdoor unit up in the air on the wall.