New! 62 available. Airspool Quick 'n' Easy HS12 (12,000 BTU) solar air conditioner/heater with superheat. 5 minutes (literally) to connect everything. No HVAC tech needed. 12-month happiness guarantee!

Who doesn't like free air conditioning and free heat?! This unit still cools up to 134 F, but now, you can heat your home even when it's a bone-chilling -22 F outside.  This updated system has the new, efficient R32 refrigerant with EVI (Enhanced Vapor Injection), making the compressor even stronger and more efficient in heating mode.  Important:  this unit has a NEMA 5-20P plug end for superheat, so you'll need a 20-amp breaker and NEMA 5-20R receptacle.  See the attached photos by swiping right (on your phone) or scrolling down (on your laptop) for what this looks like.

Airspool: The guaranteed success solar mini split.  Only 5 minutes to connect the refrigerant lines, communication control lines, solar lines, and alternating current (for hybrid use) using our patent-pending Quick 'n' Easy(TM) system.   Save an additional 30% off the shown price with the Inflation Reduction Act (using Form 5695's investment tax credit at 2026 tax time (current law--subject to change)). High-efficiency 22 SEER2 for cooling and 9.5 HSPF2 for heating when running on grid, infinite-efficiency free free free when running off-grid, and a combination of the two when running hybrid using both solar and grid (or inverter) power.  No batteries, inverter, or voltage controller is needed for the solar panels--just attach them in series and click them onto the outdoor unit.  So, much, much less installation friction compared to any and all other mini-splits.  In fact, you'll be able to attach the inside and outside unit in around 5 minutes. Literally, the only tool you need is a drill.  How?  The refrigerant lines twist to connect and are pre-charged with refrigerant (not just pre-vacuumed), so no vacuum pump, nitrogen tank, manifold gauge set, torque wrench, adjustable wrench, your brother-in-law, your neighbor, etc. are needed.  Same with the included communications control wires...just twist to connect.  And the included UL-approved, correct-amperage electrical cord is not only included but also pre-installed. Thinking you might need to move your unit in the future?  No problem!  Yes, this is a portable mini-split. So, if you want to move the Quick 'n' Easy(TM) to another room?  To another house in another state?  Have at it.  It's portable like that.  Just unscrew and unplug, and then set it up the same way at your new location. 

Here's what's included...

• The system (inside and outside units) for 12,000 BTU cooling/12,500 heating
• Both free cooling and heating (yes, this is a heat pump)
• The Airspool app--schedule, control, and see your solar savings from anywhere in the world where you have either a cellular or an Internet connection
• 110v/115v/120v 15-amp (14 AWG) power cord with plug
• Insulated copper 3-meter line set to connect the two units
• Dust caps for protecting valves pre-insulation
• Remote control with batteries
• 4-meter 4-lead communication control wire between indoor and outdoor unit
• 10' condensate hose
• 2" wide x 50' long non-adhesive wrapping tape
• Wall flange and putty
• 2 MC4 disconnect tools, extra MC4 connectors
• Condensate hose
• Thorough native-English installation and maintenance instructions
• Discounted shipping--enter your location, guaranteed under $100 for delivery within the contiguous United States.
• Risk-free 1-year buy-and-try--fully refundable for a full year if you're not delighted with the performance of this unit

Finally, these specific Quick 'n' Easy exclusives are your inclusives.  We give you...

• The solar whips--4 ft. ($18.90 value)
• The DC isolator box ($33,60 value)
• 10m of solar wire ($45.65 value)
• Electrical tape (for sealing the insulation), zip ties (for keeping the line set in place, gloves (to more easily grip the self-sealing quick connectors), 36" of insulation for covering the connectors and the line set near them, a hole saw for your drill (for passing the line set through the wall, whether it's stucco, concrete, brick, or wood), the correct-sized drill bits and a Phillips screwdriver bit (for setting the inside unit's mounting plate and the holder for the remote), and a level ($75 value for all of these goodies)
• The pre-installed plug-and-play twist-to-connect-in-5-minutes line set, communications control wire, and power cord

The whole kit and caboodle and then some.  Oh, and importantly, once we do all of this pre-installing and pre-charging behind the scenes for you, we test-run your unit to make sure everything's up to snuff before shipping, so you're ensured everything is working correctly. 

What's not included?  The solar panels and solar mounting hardware.  You'll need around 1,500w of solar.   It doesn't need to be exact.  If you are under, then just more grid power will be used.  If you are over, there'll just be some voltage that doesn't ever convert to energy.  No big deal either way. We don't offer the panels (as of now) because they're big, heavy, glass, and can't ship via UPS like the rest of the unit.  We'll work to put you in touch with someone near you that can help with these.  As of now, the solar panels should be around $600 plus mounting hardware. 

So much free cooling.  So little time, effort, money, and anxiety from doing it yourself, and no time, effort, money, or anxiety from begging a handy friend or hiring a 'contractor.' 

Give our patent-pending, award-winning, soon-to-be-cherished-by-you Quick 'n' Easy system a whirl risk free. In addition to a 3-year parts, 5-year compressor warranty, this system also has a 1-year buy-and-try guarantee.  Return it with no shipping charge and get all of your money back if it doesn't exceed your expectations. The Quick 'n' Easy is true DIY solar air conditioning.

Search 'Airspool Quick 'n' Easy' on YouTube to see how the connection is only 5 minutes and hear from others who have one.